HydroGuard™ tanks are high quality, versatile shock arrestor tanks suitable for hydraulic hammer arresting and shock suppression in a wide range of applications including:
HydroGuard™ shock arrestors are specially built with the latest diaphragm technology designed to reduce and eliminate hydraulic shock. The internal diaphragm divides the arrestor into separate air and water chambers. The sealed air chamber acts as a cushion that compresses when the water pressure suddenly increases or surges due to hydraulic shock.
HydroGuard shock arrestors are best used at the point of shock and should be installed as close to the valve or piping where the shock originates. They are ideal for washing machine and dish washer installations, sinks and toilets, reverse osmosis systems and any other plumbing application where quick closing valves or fast-acting solenoid valves are installed.
HydroGuard shock arrestors are certified and approved for potable water systems and are drinking water safe. Each HydroGuard shock arrestor is quality tested at several stages along the production line to ensure the structural integrity and safety of every arrestor.
|Model Number||Connection||Nominal Volume||Height||Diameter||Pieces|
|HGBPA-2LX||HGNPA-2LX||1” NPT / 1” BSP||2||0.5||20.8||8.2||12.6||5.0||12||13.8|
|HGBPA-3LX||HGNPA-3LX||1” NPT / 1” BSP||3||0.8||24.3||9.6||14.3||5.6||6||9.13|
|HGBPA-4LX||HGNPA-4LX||1” NPT / 1” BSP||4||1.1||26.1||10.3||16.2||6.4||1||1.7|
Note: Minor dimensional variations may occur