- Water Movement
- Pressure Tanks
- Heating Applications
- Other Products
- Quatreau Multifunction Taps
- Water Enhancement
The OneStop+ system provides protection from scale formation on internal and external plumbing surfaces. Additionaly, it reduces heavy metals such as copper, lead, mercury, zinc and cadmium. It can be installed at the point of entry to a building to treat both hot and cold water, or it can be located directly before a water heater, boiler, or other water using device that requires protection from hard water.
OneStop+ prevents scale by transforming the normal dissolved hardness minerals into undissolved crystal microparticles. These crystals stay suspended in the water and have a greatly reduced ability to react and attach to surfaces like dissolved hardness does. Therefore the problem of internal build-up of scale in pipes, water heaters, boilers, espresso and coffee machines, fixtures and glass is greatly reduced.
OneStop+ is not a water softener – water treatment chemistry “e.g. antiscalants, sequestrants, etc.” will most likely have to be changed to be compatible with OneStop+ treated water. Laundry and dishwashing chemistry will likewise require adjustments.
The OneStop+ media attracts dissolved calcium carbonate (CaCO3) scale molecules into “Templates” on the media.
The calcium carbonate (CaCO3) scale molecules grow into microscopic crystals.
The crystals detach when they are too large to be held by the OneStop+ media. These harmless crystals effectively isolate the calcium carbonate (CaCO3) scale molecules from the water and anything the water comes in contact with.
|Model Number||Connection||Continous Flowrate||Peak Flowrate||Cartridge Lifetime||Max. Inlet Water Temperature||Box Qty|
|OSP-10SB||¾” BSP||3L/min 0.8 gal/min||5L/min 1.3 gal/min||18-24 months*||40°C / 104°F||12|
|OSP-10SN||¾” NPT||3L/min 0.8 gal/min||5L/min 1.3 gal/min||18-24 months*||40°C / 104°F||12|
|OSP-10JB||¾” BSP||8L/min 2.1 gal/min||12L/min 3.2 gal/min||18-24 months*||40°C / 104°F||12|
|OSP-10JN||¾” NPT||8L/min 2.1 gal/min||12L/min 3.2 gal/min||18-24 months*||40°C / 104°F||12|
|OSP-20JB||¾” BSP||15L/min 4.0 gal/min||22L/min 5.8 gal/min||18-24 months*||40°C / 104°F||12|
|OSP-20JN||¾” NPT||15L/min 4.0 gal/min||22L/min 5.8 gal/min||18-24 months*||40°C / 104°F||12|
|pH range||6.5 ~ 8.5|
|Maximum hardness||1300 ppm|
|Chlorine, Max.||3 ppm|
|Ferrous Iron, Max.||0.3 ppm|
|Manganese, Max.||0.05 ppm|
|Calcium Sulphate (CaSO4)||>300 ppm, Treat before OneStop+|
|Oil and Polyphosphates||Treat before OneStop+|
|Hydrogen Sulfide||Treat before OneStop+|
|Phosphate (PO4)||0.3 ppm: Activated Carbon Prefiltration Required|